⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sawyer County › Edgewater (54834)

Edgewater, WI (54834): well depth, water level & drilling cost

✓ 638 WI DNR records · Sawyer County

82 ftmedian well depth
56 ft–137 fttypical depth range
27 ftmedian static water level
15 gpmmedian yield (509 tests)

Pull every recorded well near a Edgewater (54834) address — $49

How deep are wells in and around Edgewater (54834), Wisconsin?

The median drilled well depth in and around Edgewater (54834) is 82 ft, based on 510 wells with recorded depths in the state WI DNR database. Half fall between 56 ft and 137 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Edgewater (54834)?

Applying published per-foot rates to the local median depth of 82 ft: drilling and casing alone typically runs $2,050–$5,330; a complete system including pump, pressure tank, and hookup typically runs $4,920–$8,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Edgewater (54834)?

The median static water level is 27 ft below ground surface (middle half of wells: 18 ft–47 ft), from 509 measurements.

Drilled depth distribution

0–50 ft 103 50–100 ft 199 100–150 ft 107 150–200 ft 47 200–300 ft 48 300–400 ft 5 400–600 ft 1 600+ ft 0
Looking at a specific property in Edgewater (54834)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Edgewater (54834)

Free. Goes to licensed drillers working Sawyer County.

Part of Sawyer County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.