⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Bayfield County › Grand View (54839)

Grand View, WI (54839): well depth, water level & drilling cost

✓ 357 WI DNR records · Bayfield County

80 ftmedian well depth
56 ft–122 fttypical depth range
35 ftmedian static water level
10 gpmmedian yield (214 tests)

Pull every recorded well near a Grand View (54839) address — $49

How deep are wells in and around Grand View (54839), Wisconsin?

The median drilled well depth in and around Grand View (54839) is 80 ft, based on 215 wells with recorded depths in the state WI DNR database. Half fall between 56 ft and 122 ft; 90% are shallower than 179 ft.

How much does it cost to drill a well in and around Grand View (54839)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Grand View (54839)?

The median static water level is 35 ft below ground surface (middle half of wells: 18 ft–58 ft), from 214 measurements.

Drilled depth distribution

0–50 ft 35 50–100 ft 102 100–150 ft 40 150–200 ft 20 200–300 ft 13 300–400 ft 4 400–600 ft 1 600+ ft 0
Looking at a specific property in Grand View (54839)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Grand View (54839)

Free. Goes to licensed drillers working Bayfield County.

Part of Bayfield County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.