⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sawyer County › Hayward (54843)

Hayward, WI (54843): well depth, water level & drilling cost

✓ 4,127 WI DNR records · Sawyer County

81 ftmedian well depth
59 ft–119 fttypical depth range
25 ftmedian static water level
10 gpmmedian yield (2,977 tests)

Pull every recorded well near a Hayward (54843) address — $49

How deep are wells in and around Hayward (54843), Wisconsin?

The median drilled well depth in and around Hayward (54843) is 81 ft, based on 3,028 wells with recorded depths in the state WI DNR database. Half fall between 59 ft and 119 ft; 90% are shallower than 156 ft.

How much does it cost to drill a well in and around Hayward (54843)?

Applying published per-foot rates to the local median depth of 86 ft: drilling and casing alone typically runs $2,150–$5,590; a complete system including pump, pressure tank, and hookup typically runs $5,160–$8,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hayward (54843)?

The median static water level is 25 ft below ground surface (middle half of wells: 14 ft–42 ft), from 3,014 measurements.

Drilled depth distribution

0–50 ft 492 50–100 ft 1,400 100–150 ft 760 150–200 ft 238 200–300 ft 112 300–400 ft 22 400–600 ft 2 600+ ft 2
Looking at a specific property in Hayward (54843)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hayward (54843)

Free. Goes to licensed drillers working Sawyer County.

Part of Sawyer County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.