⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Bayfield County › Herbster (54844)

Herbster, WI (54844): well depth, water level & drilling cost

✓ 163 WI DNR records · Bayfield County

141 ftmedian well depth
100 ft–190 fttypical depth range
45 ftmedian static water level
10 gpmmedian yield (122 tests)

Pull every recorded well near a Herbster (54844) address — $49

How deep are wells in and around Herbster (54844), Wisconsin?

The median drilled well depth in and around Herbster (54844) is 141 ft, based on 122 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 190 ft; 90% are shallower than 277 ft.

How much does it cost to drill a well in and around Herbster (54844)?

Applying published per-foot rates to the local median depth of 141 ft: drilling and casing alone typically runs $3,525–$9,165; a complete system including pump, pressure tank, and hookup typically runs $8,460–$14,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Herbster (54844)?

The median static water level is 45 ft below ground surface (middle half of wells: 20 ft–84 ft), from 122 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 22 100–150 ft 41 150–200 ft 27 200–300 ft 22 300–400 ft 6 400–600 ft 2 600+ ft 0
Looking at a specific property in Herbster (54844)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Herbster (54844)

Free. Goes to licensed drillers working Bayfield County.

Part of Bayfield County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.