⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Burnett County › Hertel (54845)

Hertel, WI (54845): well depth, water level & drilling cost

✓ 1,257 WI DNR records · Burnett County

86 ftmedian well depth
67 ft–122 fttypical depth range
30 ftmedian static water level
15 gpmmedian yield (927 tests)

Pull every recorded well near a Hertel (54845) address — $49

How deep are wells in and around Hertel (54845), Wisconsin?

The median drilled well depth in and around Hertel (54845) is 86 ft, based on 931 wells with recorded depths in the state WI DNR database. Half fall between 67 ft and 122 ft; 90% are shallower than 168 ft.

How much does it cost to drill a well in and around Hertel (54845)?

Applying published per-foot rates to the local median depth of 106 ft: drilling and casing alone typically runs $2,650–$6,890; a complete system including pump, pressure tank, and hookup typically runs $6,360–$10,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hertel (54845)?

The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–45 ft), from 961 measurements.

Drilled depth distribution

0–50 ft 74 50–100 ft 484 100–150 ft 238 150–200 ft 90 200–300 ft 34 300–400 ft 9 400–600 ft 1 600+ ft 1
Looking at a specific property in Hertel (54845)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hertel (54845)

Free. Goes to licensed drillers working Burnett County.

Part of Burnett County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.