Wisconsin Well Data › Bayfield County › Iron River (54847)
Iron River, WI (54847): well depth, water level & drilling cost
✓ 904 WI DNR records · Bayfield County
Pull every recorded well near a Iron River (54847) address — $49
How deep are wells in and around Iron River (54847), Wisconsin?
The median drilled well depth in and around Iron River (54847) is 97 ft, based on 643 wells with recorded depths in the state WI DNR database. Half fall between 73 ft and 143 ft; 90% are shallower than 184 ft.
How much does it cost to drill a well in and around Iron River (54847)?
Applying published per-foot rates to the local median depth of 97 ft: drilling and casing alone typically runs $2,425–$6,305; a complete system including pump, pressure tank, and hookup typically runs $5,820–$9,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Iron River (54847)?
The median static water level is 30 ft below ground surface (middle half of wells: 19 ft–49 ft), from 639 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bayfield County.
Part of Bayfield County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.