⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Douglas County › Maple (54854)

Maple, WI (54854): well depth, water level & drilling cost

✓ 310 WI DNR records · Douglas County

223 ftmedian well depth
192 ft–260 fttypical depth range
79 ftmedian static water level
10 gpmmedian yield (193 tests)

Pull every recorded well near a Maple (54854) address — $49

How deep are wells in and around Maple (54854), Wisconsin?

The median drilled well depth in and around Maple (54854) is 223 ft, based on 197 wells with recorded depths in the state WI DNR database. Half fall between 192 ft and 260 ft; 90% are shallower than 306 ft.

How much does it cost to drill a well in and around Maple (54854)?

Applying published per-foot rates to the local median depth of 223 ft: drilling and casing alone typically runs $5,575–$14,495; a complete system including pump, pressure tank, and hookup typically runs $13,380–$22,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Maple (54854)?

The median static water level is 79 ft below ground surface (middle half of wells: 20 ft–114 ft), from 194 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 5 100–150 ft 12 150–200 ft 33 200–300 ft 114 300–400 ft 32 400–600 ft 0 600+ ft 0
Looking at a specific property in Maple (54854)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Maple (54854)

Free. Goes to licensed drillers working Douglas County.

Part of Douglas County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.