⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Ashland County › Marengo (54855)

Marengo, WI (54855): well depth, water level & drilling cost

✓ 503 WI DNR records · Ashland County

137 ftmedian well depth
93 ft–200 fttypical depth range
40 ftmedian static water level
9 gpmmedian yield (326 tests)

Pull every recorded well near a Marengo (54855) address — $49

How deep are wells in and around Marengo (54855), Wisconsin?

The median drilled well depth in and around Marengo (54855) is 137 ft, based on 340 wells with recorded depths in the state WI DNR database. Half fall between 93 ft and 200 ft; 90% are shallower than 260 ft.

How much does it cost to drill a well in and around Marengo (54855)?

Applying published per-foot rates to the local median depth of 137 ft: drilling and casing alone typically runs $3,425–$8,905; a complete system including pump, pressure tank, and hookup typically runs $8,220–$13,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Marengo (54855)?

The median static water level is 40 ft below ground surface (middle half of wells: 19 ft–64 ft), from 328 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 97 100–150 ft 84 150–200 ft 59 200–300 ft 66 300–400 ft 22 400–600 ft 1 600+ ft 0
Looking at a specific property in Marengo (54855)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Marengo (54855)

Free. Goes to licensed drillers working Ashland County.

Part of Ashland County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.