⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Bayfield County › Mason (54856)

Mason, WI (54856): well depth, water level & drilling cost

✓ 264 WI DNR records · Bayfield County

113 ftmedian well depth
85 ft–183 fttypical depth range
46 ftmedian static water level
10 gpmmedian yield (146 tests)

Pull every recorded well near a Mason (54856) address — $49

How deep are wells in and around Mason (54856), Wisconsin?

The median drilled well depth in and around Mason (54856) is 113 ft, based on 147 wells with recorded depths in the state WI DNR database. Half fall between 85 ft and 183 ft; 90% are shallower than 250 ft.

How much does it cost to drill a well in and around Mason (54856)?

Applying published per-foot rates to the local median depth of 113 ft: drilling and casing alone typically runs $2,825–$7,345; a complete system including pump, pressure tank, and hookup typically runs $6,780–$11,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mason (54856)?

The median static water level is 46 ft below ground surface (middle half of wells: 25 ft–82 ft), from 146 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 55 100–150 ft 35 150–200 ft 25 200–300 ft 19 300–400 ft 9 400–600 ft 0 600+ ft 0
Looking at a specific property in Mason (54856)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mason (54856)

Free. Goes to licensed drillers working Bayfield County.

Part of Bayfield County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.