⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County › Mikana (54857)

Mikana, WI (54857): well depth, water level & drilling cost

✓ 699 WI DNR records · Barron County

58 ftmedian well depth
40 ft–79 fttypical depth range
24 ftmedian static water level
15 gpmmedian yield (549 tests)

Pull every recorded well near a Mikana (54857) address — $49

How deep are wells in and around Mikana (54857), Wisconsin?

The median drilled well depth in and around Mikana (54857) is 58 ft, based on 547 wells with recorded depths in the state WI DNR database. Half fall between 40 ft and 79 ft; 90% are shallower than 129 ft.

How much does it cost to drill a well in and around Mikana (54857)?

Applying published per-foot rates to the local median depth of 58 ft: drilling and casing alone typically runs $1,450–$3,770; a complete system including pump, pressure tank, and hookup typically runs $3,480–$5,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mikana (54857)?

The median static water level is 24 ft below ground surface (middle half of wells: 18 ft–36 ft), from 551 measurements.

Drilled depth distribution

0–50 ft 202 50–100 ft 255 100–150 ft 44 150–200 ft 18 200–300 ft 14 300–400 ft 12 400–600 ft 2 600+ ft 0
Looking at a specific property in Mikana (54857)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mikana (54857)

Free. Goes to licensed drillers working Barron County.

Part of Barron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.