⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sawyer County › Ojibwa (54862)

Ojibwa, WI (54862): well depth, water level & drilling cost

✓ 287 WI DNR records · Sawyer County

72 ftmedian well depth
50 ft–94 fttypical depth range
25 ftmedian static water level
10 gpmmedian yield (189 tests)

Pull every recorded well near a Ojibwa (54862) address — $49

How deep are wells in and around Ojibwa (54862), Wisconsin?

The median drilled well depth in and around Ojibwa (54862) is 72 ft, based on 192 wells with recorded depths in the state WI DNR database. Half fall between 50 ft and 94 ft; 90% are shallower than 142 ft.

How much does it cost to drill a well in and around Ojibwa (54862)?

Applying published per-foot rates to the local median depth of 72 ft: drilling and casing alone typically runs $1,800–$4,680; a complete system including pump, pressure tank, and hookup typically runs $4,320–$7,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Ojibwa (54862)?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–38 ft), from 189 measurements.

Drilled depth distribution

0–50 ft 43 50–100 ft 105 100–150 ft 28 150–200 ft 7 200–300 ft 8 300–400 ft 0 400–600 ft 1 600+ ft 0
Looking at a specific property in Ojibwa (54862)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Ojibwa (54862)

Free. Goes to licensed drillers working Sawyer County.

Part of Sawyer County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.