⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Burnett County › Siren (54872)

Siren, WI (54872): well depth, water level & drilling cost

✓ 1,251 WI DNR records · Burnett County

99 ftmedian well depth
60 ft–144 fttypical depth range
20 ftmedian static water level
20 gpmmedian yield (875 tests)

Pull every recorded well near a Siren (54872) address — $49

How deep are wells in and around Siren (54872), Wisconsin?

The median drilled well depth in and around Siren (54872) is 99 ft, based on 899 wells with recorded depths in the state WI DNR database. Half fall between 60 ft and 144 ft; 90% are shallower than 193 ft.

How much does it cost to drill a well in and around Siren (54872)?

Applying published per-foot rates to the local median depth of 117 ft: drilling and casing alone typically runs $2,925–$7,605; a complete system including pump, pressure tank, and hookup typically runs $7,020–$11,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Siren (54872)?

The median static water level is 20 ft below ground surface (middle half of wells: 9 ft–30 ft), from 1,037 measurements.

Drilled depth distribution

0–50 ft 144 50–100 ft 310 100–150 ft 242 150–200 ft 125 200–300 ft 68 300–400 ft 6 400–600 ft 4 600+ ft 0
Looking at a specific property in Siren (54872)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Siren (54872)

Free. Goes to licensed drillers working Burnett County.

Part of Burnett County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.