Wisconsin Well Data › Douglas County › Solon Springs (54873)
Solon Springs, WI (54873): well depth, water level & drilling cost
✓ 878 WI DNR records · Douglas County
Pull every recorded well near a Solon Springs (54873) address — $49
How deep are wells in and around Solon Springs (54873), Wisconsin?
The median drilled well depth in and around Solon Springs (54873) is 99 ft, based on 646 wells with recorded depths in the state WI DNR database. Half fall between 78 ft and 140 ft; 90% are shallower than 211 ft.
How much does it cost to drill a well in and around Solon Springs (54873)?
Applying published per-foot rates to the local median depth of 99 ft: drilling and casing alone typically runs $2,475–$6,435; a complete system including pump, pressure tank, and hookup typically runs $5,940–$9,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Solon Springs (54873)?
The median static water level is 23 ft below ground surface (middle half of wells: 14 ft–38 ft), from 643 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Douglas County.
Part of Douglas County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.