Wisconsin Well Data › Douglas County › South Range (54874)
South Range, WI (54874): well depth, water level & drilling cost
✓ 768 WI DNR records · Douglas County
Pull every recorded well near a South Range (54874) address — $49
How deep are wells in and around South Range (54874), Wisconsin?
The median drilled well depth in and around South Range (54874) is 220 ft, based on 390 wells with recorded depths in the state WI DNR database. Half fall between 180 ft and 297 ft; 90% are shallower than 350 ft.
How much does it cost to drill a well in and around South Range (54874)?
Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around South Range (54874)?
The median static water level is 34 ft below ground surface (middle half of wells: 17 ft–80 ft), from 383 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Douglas County.
Part of Douglas County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.