⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Bayfield County › Washburn (54891)

Washburn, WI (54891): well depth, water level & drilling cost

✓ 779 WI DNR records · Bayfield County

147 ftmedian well depth
100 ft–220 fttypical depth range
68 ftmedian static water level
10 gpmmedian yield (361 tests)

Pull every recorded well near a Washburn (54891) address — $49

How deep are wells in and around Washburn (54891), Wisconsin?

The median drilled well depth in and around Washburn (54891) is 147 ft, based on 372 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 220 ft; 90% are shallower than 296 ft.

How much does it cost to drill a well in and around Washburn (54891)?

Applying published per-foot rates to the local median depth of 147 ft: drilling and casing alone typically runs $3,675–$9,555; a complete system including pump, pressure tank, and hookup typically runs $8,820–$14,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Washburn (54891)?

The median static water level is 68 ft below ground surface (middle half of wells: 31 ft–134 ft), from 357 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 76 100–150 ft 106 150–200 ft 52 200–300 ft 94 300–400 ft 27 400–600 ft 9 600+ ft 0
Looking at a specific property in Washburn (54891)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Washburn (54891)

Free. Goes to licensed drillers working Bayfield County.

Part of Bayfield County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.