⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Portage County › Almond (54909)

Almond, WI (54909): well depth, water level & drilling cost

✓ 1,127 WI DNR records · Portage County

126 ftmedian well depth
98 ft–159 fttypical depth range
70 ftmedian static water level
18 gpmmedian yield (646 tests)

Pull every recorded well near a Almond (54909) address — $49

How deep are wells in and around Almond (54909), Wisconsin?

The median drilled well depth in and around Almond (54909) is 126 ft, based on 715 wells with recorded depths in the state WI DNR database. Half fall between 98 ft and 159 ft; 90% are shallower than 197 ft.

How much does it cost to drill a well in and around Almond (54909)?

Applying published per-foot rates to the local median depth of 126 ft: drilling and casing alone typically runs $3,150–$8,190; a complete system including pump, pressure tank, and hookup typically runs $7,560–$12,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Almond (54909)?

The median static water level is 70 ft below ground surface (middle half of wells: 50 ft–103 ft), from 664 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 184 100–150 ft 295 150–200 ft 159 200–300 ft 67 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Almond (54909)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Almond (54909)

Free. Goes to licensed drillers working Portage County.

Part of Portage County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.