⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Outagamie County › Appleton (54914)

Appleton, WI (54914): well depth, water level & drilling cost

✓ 1,194 WI DNR records · Outagamie County

180 ftmedian well depth
122 ft–240 fttypical depth range
50 ftmedian static water level
30 gpmmedian yield (172 tests)

Pull every recorded well near a Appleton (54914) address — $49

How deep are wells in and around Appleton (54914), Wisconsin?

The median drilled well depth in and around Appleton (54914) is 180 ft, based on 186 wells with recorded depths in the state WI DNR database. Half fall between 122 ft and 240 ft; 90% are shallower than 321 ft.

How much does it cost to drill a well in and around Appleton (54914)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Appleton (54914)?

The median static water level is 50 ft below ground surface (middle half of wells: 40 ft–73 ft), from 174 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 13 100–150 ft 67 150–200 ft 23 200–300 ft 51 300–400 ft 27 400–600 ft 3 600+ ft 1
Looking at a specific property in Appleton (54914)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Appleton (54914)

Free. Goes to licensed drillers working Outagamie County.

Part of Outagamie County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.