Wisconsin Well Data › Waupaca County › Bear Creek (54922)
Bear Creek, WI (54922): well depth, water level & drilling cost
✓ 791 WI DNR records · Waupaca County
Pull every recorded well near a Bear Creek (54922) address — $49
How deep are wells in and around Bear Creek (54922), Wisconsin?
The median drilled well depth in and around Bear Creek (54922) is 137 ft, based on 526 wells with recorded depths in the state WI DNR database. Half fall between 87 ft and 181 ft; 90% are shallower than 225 ft.
How much does it cost to drill a well in and around Bear Creek (54922)?
Applying published per-foot rates to the local median depth of 137 ft: drilling and casing alone typically runs $3,425–$8,905; a complete system including pump, pressure tank, and hookup typically runs $8,220–$13,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Bear Creek (54922)?
The median static water level is 14 ft below ground surface (middle half of wells: 7 ft–24 ft), from 480 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Waupaca County.
Part of Waupaca County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.