⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Outagamie County › Dale (54931)

Dale, WI (54931): well depth, water level & drilling cost

✓ 844 WI DNR records · Outagamie County

142 ftmedian well depth
120 ft–162 fttypical depth range
40 ftmedian static water level
25 gpmmedian yield (545 tests)

Pull every recorded well near a Dale (54931) address — $49

How deep are wells in and around Dale (54931), Wisconsin?

The median drilled well depth in and around Dale (54931) is 142 ft, based on 573 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 162 ft; 90% are shallower than 182 ft.

How much does it cost to drill a well in and around Dale (54931)?

Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dale (54931)?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–58 ft), from 555 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 42 100–150 ft 304 150–200 ft 188 200–300 ft 36 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Dale (54931)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dale (54931)

Free. Goes to licensed drillers working Outagamie County.

Part of Outagamie County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.