⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Waupaca County › Marion (54950)

Marion, WI (54950): well depth, water level & drilling cost

✓ 296 WI DNR records · Waupaca County

125 ftmedian well depth
82 ft–204 fttypical depth range
30 ftmedian static water level
20 gpmmedian yield (224 tests)

Pull every recorded well near a Marion (54950) address — $49

How deep are wells in and around Marion (54950), Wisconsin?

The median drilled well depth in and around Marion (54950) is 125 ft, based on 224 wells with recorded depths in the state WI DNR database. Half fall between 82 ft and 204 ft; 90% are shallower than 299 ft.

How much does it cost to drill a well in and around Marion (54950)?

Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Marion (54950)?

The median static water level is 30 ft below ground surface (middle half of wells: 16 ft–55 ft), from 225 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 71 100–150 ft 60 150–200 ft 25 200–300 ft 35 300–400 ft 19 400–600 ft 4 600+ ft 0
Looking at a specific property in Marion (54950)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Marion (54950)

Free. Goes to licensed drillers working Waupaca County.

Part of Waupaca County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.