⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Winnebago County › Neenah (54956)

Neenah, WI (54956): well depth, water level & drilling cost

✓ 2,494 WI DNR records · Winnebago County

201 ftmedian well depth
125 ft–320 fttypical depth range
56 ftmedian static water level
30 gpmmedian yield (1,153 tests)

Pull every recorded well near a Neenah (54956) address — $49

How deep are wells in and around Neenah (54956), Wisconsin?

The median drilled well depth in and around Neenah (54956) is 201 ft, based on 1,203 wells with recorded depths in the state WI DNR database. Half fall between 125 ft and 320 ft; 90% are shallower than 340 ft.

How much does it cost to drill a well in and around Neenah (54956)?

Applying published per-foot rates to the local median depth of 201 ft: drilling and casing alone typically runs $5,025–$13,065; a complete system including pump, pressure tank, and hookup typically runs $12,060–$20,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Neenah (54956)?

The median static water level is 56 ft below ground surface (middle half of wells: 30 ft–82 ft), from 1,174 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 58 100–150 ft 385 150–200 ft 149 200–300 ft 194 300–400 ft 405 400–600 ft 9 600+ ft 1
Looking at a specific property in Neenah (54956)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Neenah (54956)

Free. Goes to licensed drillers working Winnebago County.

Part of Winnebago County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.