⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Winnebago County › Neenah (54957)

Neenah, WI (54957): well depth, water level & drilling cost

✓ 406 WI DNR records · Winnebago County

142 ftmedian well depth
112 ft–201 fttypical depth range
30 ftmedian static water level
30 gpmmedian yield (135 tests)

Pull every recorded well near a Neenah (54957) address — $49

How deep are wells in and around Neenah (54957), Wisconsin?

The median drilled well depth in and around Neenah (54957) is 142 ft, based on 142 wells with recorded depths in the state WI DNR database. Half fall between 112 ft and 201 ft; 90% are shallower than 368 ft.

How much does it cost to drill a well in and around Neenah (54957)?

Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Neenah (54957)?

The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–40 ft), from 136 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 23 100–150 ft 60 150–200 ft 19 200–300 ft 21 300–400 ft 10 400–600 ft 7 600+ ft 2
Looking at a specific property in Neenah (54957)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Neenah (54957)

Free. Goes to licensed drillers working Winnebago County.

Part of Winnebago County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.