⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Winnebago County › Pickett (54964)

Pickett, WI (54964): well depth, water level & drilling cost

✓ 715 WI DNR records · Winnebago County

154 ftmedian well depth
125 ft–234 fttypical depth range
38 ftmedian static water level
20 gpmmedian yield (345 tests)

Pull every recorded well near a Pickett (54964) address — $49

How deep are wells in and around Pickett (54964), Wisconsin?

The median drilled well depth in and around Pickett (54964) is 154 ft, based on 348 wells with recorded depths in the state WI DNR database. Half fall between 125 ft and 234 ft; 90% are shallower than 280 ft.

How much does it cost to drill a well in and around Pickett (54964)?

Applying published per-foot rates to the local median depth of 154 ft: drilling and casing alone typically runs $3,850–$10,010; a complete system including pump, pressure tank, and hookup typically runs $9,240–$15,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pickett (54964)?

The median static water level is 38 ft below ground surface (middle half of wells: 24 ft–52 ft), from 345 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 25 100–150 ft 138 150–200 ft 63 200–300 ft 88 300–400 ft 29 400–600 ft 1 600+ ft 0
Looking at a specific property in Pickett (54964)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pickett (54964)

Free. Goes to licensed drillers working Winnebago County.

Part of Winnebago County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.