Wisconsin Well Data › Waushara County › Pine River (54965)
Pine River, WI (54965): well depth, water level & drilling cost
✓ 692 WI DNR records · Waushara County
Pull every recorded well near a Pine River (54965) address — $49
How deep are wells in and around Pine River (54965), Wisconsin?
The median drilled well depth in and around Pine River (54965) is 115 ft, based on 452 wells with recorded depths in the state WI DNR database. Half fall between 88 ft and 158 ft; 90% are shallower than 199 ft.
How much does it cost to drill a well in and around Pine River (54965)?
Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Pine River (54965)?
The median static water level is 36 ft below ground surface (middle half of wells: 14 ft–58 ft), from 450 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Waushara County.
Part of Waushara County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.