⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Waushara County › Saxeville (54976)

Saxeville, WI (54976): well depth, water level & drilling cost

✓ 1,081 WI DNR records · Waushara County

90 ftmedian well depth
74 ft–120 fttypical depth range
35 ftmedian static water level
20 gpmmedian yield (689 tests)

Pull every recorded well near a Saxeville (54976) address — $49

How deep are wells in and around Saxeville (54976), Wisconsin?

The median drilled well depth in and around Saxeville (54976) is 90 ft, based on 695 wells with recorded depths in the state WI DNR database. Half fall between 74 ft and 120 ft; 90% are shallower than 152 ft.

How much does it cost to drill a well in and around Saxeville (54976)?

Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Saxeville (54976)?

The median static water level is 35 ft below ground surface (middle half of wells: 22 ft–50 ft), from 692 measurements.

Drilled depth distribution

0–50 ft 17 50–100 ft 397 100–150 ft 205 150–200 ft 54 200–300 ft 21 300–400 ft 0 400–600 ft 0 600+ ft 1
Looking at a specific property in Saxeville (54976)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Saxeville (54976)

Free. Goes to licensed drillers working Waushara County.

Part of Waushara County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.