Wisconsin Well Data › Fond Du Lac County › Van Dyne (54979)
Van Dyne, WI (54979): well depth, water level & drilling cost
✓ 1,389 WI DNR records · Fond Du Lac County
Pull every recorded well near a Van Dyne (54979) address — $49
How deep are wells in and around Van Dyne (54979), Wisconsin?
The median drilled well depth in and around Van Dyne (54979) is 142 ft, based on 641 wells with recorded depths in the state WI DNR database. Half fall between 102 ft and 205 ft; 90% are shallower than 245 ft.
How much does it cost to drill a well in and around Van Dyne (54979)?
Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Van Dyne (54979)?
The median static water level is 20 ft below ground surface (middle half of wells: 10 ft–38 ft), from 635 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Fond Du Lac County.
Part of Fond Du Lac County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.