⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Winnebago County › Waukau (54980)

Waukau, WI (54980): well depth, water level & drilling cost

✓ 356 WI DNR records · Winnebago County

152 ftmedian well depth
123 ft–200 fttypical depth range
30 ftmedian static water level
20 gpmmedian yield (209 tests)

Pull every recorded well near a Waukau (54980) address — $49

How deep are wells in and around Waukau (54980), Wisconsin?

The median drilled well depth in and around Waukau (54980) is 152 ft, based on 212 wells with recorded depths in the state WI DNR database. Half fall between 123 ft and 200 ft; 90% are shallower than 225 ft.

How much does it cost to drill a well in and around Waukau (54980)?

Applying published per-foot rates to the local median depth of 152 ft: drilling and casing alone typically runs $3,800–$9,880; a complete system including pump, pressure tank, and hookup typically runs $9,120–$15,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Waukau (54980)?

The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–40 ft), from 211 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 13 100–150 ft 91 150–200 ft 53 200–300 ft 53 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Waukau (54980)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Waukau (54980)

Free. Goes to licensed drillers working Winnebago County.

Part of Winnebago County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.