⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Waushara County › Wild Rose (54984)

Wild Rose, WI (54984): well depth, water level & drilling cost

✓ 1,690 WI DNR records · Waushara County

91 ftmedian well depth
71 ft–117 fttypical depth range
21 ftmedian static water level
20 gpmmedian yield (1,094 tests)

Pull every recorded well near a Wild Rose (54984) address — $49

How deep are wells in and around Wild Rose (54984), Wisconsin?

The median drilled well depth in and around Wild Rose (54984) is 91 ft, based on 1,126 wells with recorded depths in the state WI DNR database. Half fall between 71 ft and 117 ft; 90% are shallower than 157 ft.

How much does it cost to drill a well in and around Wild Rose (54984)?

Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wild Rose (54984)?

The median static water level is 21 ft below ground surface (middle half of wells: 13 ft–40 ft), from 1,117 measurements.

Drilled depth distribution

0–50 ft 61 50–100 ft 618 100–150 ft 320 150–200 ft 93 200–300 ft 33 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Wild Rose (54984)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wild Rose (54984)

Free. Goes to licensed drillers working Waushara County.

Part of Waushara County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.