Wisconsin Well Data › Winnebago County › Winneconne (54986)
Winneconne, WI (54986): well depth, water level & drilling cost
✓ 1,042 WI DNR records · Winnebago County
Pull every recorded well near a Winneconne (54986) address — $49
How deep are wells in and around Winneconne (54986), Wisconsin?
The median drilled well depth in and around Winneconne (54986) is 142 ft, based on 492 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 180 ft; 90% are shallower than 212 ft.
How much does it cost to drill a well in and around Winneconne (54986)?
Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Winneconne (54986)?
The median static water level is 5 ft below ground surface (middle half of wells: 1 ft–15 ft), from 483 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Winnebago County.
Part of Winnebago County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.