⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Juneau County

Juneau County, Wisconsin: well depth, water level & drilling cost

✓ 7,328 WI DNR records · verified 2026-06-30

62 ftmedian well depth
46 ft–100 fttypical depth range
15 ftmedian static water level
15 gpmmedian yield (5,696 tests)

How deep are wells in Juneau County, Wisconsin?

The median drilled well depth in Juneau County is 62 ft, based on 5,939 wells with recorded depths in the state WI DNR database. Half of all wells fall between 46 ft and 100 ft; 90% are shallower than 146 ft. Wells drilled since 2016 have a median depth of 61 ft.

How much does it cost to drill a well in Juneau County?

Applying published per-foot rates to the local median depth of 61 ft: drilling and casing alone typically runs $1,525–$3,965; a complete system including pump, pressure tank, and hookup typically runs $3,660–$6,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Juneau County?

The median static water level is 15 ft below ground surface (middle half of wells: 9 ft–27 ft), from 6,021 measurements.

How much water do wells in Juneau County produce?

The median tested yield is 15 gpm (middle half: 12 gpm–20 gpm), from 5,696 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Juneau County address — $19

Drilled depth distribution

0–50 ft 1,614 50–100 ft 2,695 100–150 ft 1,041 150–200 ft 130 200–300 ft 249 300–400 ft 135 400–600 ft 75 600+ ft 0

Who drills wells in Juneau County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
FOSTER'S SEPTIC & WELL SERVICE LLC332
WALKER, BRUCE A276
NELSONS PLBG & ELEC INC263
MARSHALL WELL DRILLING CORP260
SAM'S WELL DRILLING INC139
LANGE PLUMBING INC75
HEEG WELL AND PUMP LLC68
MARESCH, JACOB J52

Get quotes from local drillers

Looking at a specific property in Juneau County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.