⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dodge County › Clyman (53016)

Clyman, WI (53016): well depth, water level & drilling cost

✓ 151 WI DNR records · Dodge County

165 ftmedian well depth
132 ft–202 fttypical depth range
48 ftmedian static water level
20 gpmmedian yield (92 tests)

Pull every recorded well near a Clyman (53016) address — $49

How deep are wells in and around Clyman (53016), Wisconsin?

The median drilled well depth in and around Clyman (53016) is 165 ft, based on 93 wells with recorded depths in the state WI DNR database. Half fall between 132 ft and 202 ft; 90% are shallower than 264 ft.

How much does it cost to drill a well in and around Clyman (53016)?

Applying published per-foot rates to the local median depth of 165 ft: drilling and casing alone typically runs $4,125–$10,725; a complete system including pump, pressure tank, and hookup typically runs $9,900–$16,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Clyman (53016)?

The median static water level is 48 ft below ground surface (middle half of wells: 34 ft–65 ft), from 93 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 4 100–150 ft 34 150–200 ft 25 200–300 ft 27 300–400 ft 3 400–600 ft 0 600+ ft 0
Looking at a specific property in Clyman (53016)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Clyman (53016)

Free. Goes to licensed drillers working Dodge County.

Part of Dodge County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.