⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dodge County

Dodge County, Wisconsin: well depth, water level & drilling cost

✓ 12,796 WI DNR records · verified 2026-06-30

147 ftmedian well depth
121 ft–200 fttypical depth range
36 ftmedian static water level
20 gpmmedian yield (5,733 tests)

How deep are wells in Dodge County, Wisconsin?

The median drilled well depth in Dodge County is 147 ft, based on 5,902 wells with recorded depths in the state WI DNR database. Half of all wells fall between 121 ft and 200 ft; 90% are shallower than 277 ft. Wells drilled since 2016 have a median depth of 160 ft.

How much does it cost to drill a well in Dodge County?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Dodge County?

The median static water level is 36 ft below ground surface (middle half of wells: 20 ft–60 ft), from 5,817 measurements.

How much water do wells in Dodge County produce?

The median tested yield is 20 gpm (middle half: 15 gpm–20 gpm), from 5,733 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Dodge County address — $19

Drilled depth distribution

0–50 ft 55 50–100 ft 642 100–150 ft 2,332 150–200 ft 1,382 200–300 ft 1,000 300–400 ft 202 400–600 ft 175 600+ ft 114

Who drills wells in Dodge County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
SAM'S WELL DRILLING INC497
STEFFES, DANIEL J147
SAM'S WELL DRILLING44
DANIEL J STEFFES44
HERR WELL DRILLING INC26
4-D WATER WELL & PUMP SERVICE LLC23
ANHALT WELL DRLG & PUMP INC19
D & D WELL & PUMPS LLC17

Get quotes from local drillers

Looking at a specific property in Dodge County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.