⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Racine County › Waterford (53185)

Waterford, WI (53185): well depth, water level & drilling cost

✓ 3,387 WI DNR records · Racine County

106 ftmedian well depth
67 ft–165 fttypical depth range
24 ftmedian static water level
20 gpmmedian yield (2,086 tests)

Pull every recorded well near a Waterford (53185) address — $49

How deep are wells in and around Waterford (53185), Wisconsin?

The median drilled well depth in and around Waterford (53185) is 106 ft, based on 2,103 wells with recorded depths in the state WI DNR database. Half fall between 67 ft and 165 ft; 90% are shallower than 204 ft.

How much does it cost to drill a well in and around Waterford (53185)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Waterford (53185)?

The median static water level is 24 ft below ground surface (middle half of wells: 14 ft–40 ft), from 2,096 measurements.

Drilled depth distribution

0–50 ft 198 50–100 ft 785 100–150 ft 454 150–200 ft 399 200–300 ft 260 300–400 ft 6 400–600 ft 1 600+ ft 0
Looking at a specific property in Waterford (53185)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Waterford (53185)

Free. Goes to licensed drillers working Racine County.

Part of Racine County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.