⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Racine County

Racine County, Wisconsin: well depth, water level & drilling cost

✓ 18,807 WI DNR records · verified 2026-06-30

125 ftmedian well depth
83 ft–179 fttypical depth range
33 ftmedian static water level
20 gpmmedian yield (8,687 tests)

How deep are wells in Racine County, Wisconsin?

The median drilled well depth in Racine County is 125 ft, based on 8,795 wells with recorded depths in the state WI DNR database. Half of all wells fall between 83 ft and 179 ft; 90% are shallower than 226 ft. Wells drilled since 2016 have a median depth of 123 ft.

How much does it cost to drill a well in Racine County?

Applying published per-foot rates to the local median depth of 123 ft: drilling and casing alone typically runs $3,075–$7,995; a complete system including pump, pressure tank, and hookup typically runs $7,380–$12,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Racine County?

The median static water level is 33 ft below ground surface (middle half of wells: 19 ft–53 ft), from 8,739 measurements.

How much water do wells in Racine County produce?

The median tested yield is 20 gpm (middle half: 14 gpm–25 gpm), from 8,687 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Racine County address — $19

Drilled depth distribution

0–50 ft 481 50–100 ft 2,511 100–150 ft 2,543 150–200 ft 1,687 200–300 ft 1,231 300–400 ft 262 400–600 ft 67 600+ ft 13

Who drills wells in Racine County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
SAM'S WELL DRILLING INC340
SWEENEY, KENNETH R235
GEHRING, LANCE M187
KRIZAN, KENNETH J152
BIERSACK, ROBERT K84
LANCE M GEHRING73
KENNETH J KRIZAN60
KENNETH R SWEENEY58

Get quotes from local drillers

Looking at a specific property in Racine County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.