⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dodge County › Lowell (53557)

Lowell, WI (53557): well depth, water level & drilling cost

✓ 335 WI DNR records · Dodge County

142 ftmedian well depth
123 ft–165 fttypical depth range
24 ftmedian static water level
20 gpmmedian yield (139 tests)

Pull every recorded well near a Lowell (53557) address — $49

How deep are wells in and around Lowell (53557), Wisconsin?

The median drilled well depth in and around Lowell (53557) is 142 ft, based on 148 wells with recorded depths in the state WI DNR database. Half fall between 123 ft and 165 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Lowell (53557)?

Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lowell (53557)?

The median static water level is 24 ft below ground surface (middle half of wells: 13 ft–40 ft), from 144 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 13 100–150 ft 73 150–200 ft 46 200–300 ft 14 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Lowell (53557)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lowell (53557)

Free. Goes to licensed drillers working Dodge County.

Part of Dodge County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.