Wisconsin Well Data › Marquette County › Briggsville (53920)
Briggsville, WI (53920): well depth, water level & drilling cost
✓ 948 WI DNR records · Marquette County
Pull every recorded well near a Briggsville (53920) address — $49
How deep are wells in and around Briggsville (53920), Wisconsin?
The median drilled well depth in and around Briggsville (53920) is 98 ft, based on 660 wells with recorded depths in the state WI DNR database. Half fall between 70 ft and 139 ft; 90% are shallower than 206 ft.
How much does it cost to drill a well in and around Briggsville (53920)?
Applying published per-foot rates to the local median depth of 98 ft: drilling and casing alone typically runs $2,450–$6,370; a complete system including pump, pressure tank, and hookup typically runs $5,880–$9,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Briggsville (53920)?
The median static water level is 20 ft below ground surface (middle half of wells: 7 ft–45 ft), from 650 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Marquette County.
Part of Marquette County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.