⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marquette County

Marquette County, Wisconsin: well depth, water level & drilling cost

✓ 7,419 WI DNR records · verified 2026-06-30

110 ftmedian well depth
77 ft–159 fttypical depth range
22 ftmedian static water level
19 gpmmedian yield (4,888 tests)

How deep are wells in Marquette County, Wisconsin?

The median drilled well depth in Marquette County is 110 ft, based on 4,942 wells with recorded depths in the state WI DNR database. Half of all wells fall between 77 ft and 159 ft; 90% are shallower than 204 ft. Wells drilled since 2016 have a median depth of 105 ft.

How much does it cost to drill a well in Marquette County?

Applying published per-foot rates to the local median depth of 105 ft: drilling and casing alone typically runs $2,625–$6,825; a complete system including pump, pressure tank, and hookup typically runs $6,300–$10,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Marquette County?

The median static water level is 22 ft below ground surface (middle half of wells: 10 ft–43 ft), from 4,935 measurements.

How much water do wells in Marquette County produce?

The median tested yield is 19 gpm (middle half: 12 gpm–25 gpm), from 4,888 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Marquette County address — $19

Drilled depth distribution

0–50 ft 299 50–100 ft 1,801 100–150 ft 1,459 150–200 ft 803 200–300 ft 495 300–400 ft 80 400–600 ft 5 600+ ft 0

Who drills wells in Marquette County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
SAM'S WELL DRILLING INC354
WELLS BY WELCH - BENTLEY WD LLC234
WALKER, BRUCE A76
FARAGO PLBG & TRENCHING INC46
MARSHALL WELL DRILLING CORP46
REICHHOFF, RODNEY J39
HEZPAZ ENTERPRIZES33
SAM'S WELL DRILLING31

Get quotes from local drillers

Looking at a specific property in Marquette County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.