⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dodge County › Columbus (53925)

Columbus, WI (53925): well depth, water level & drilling cost

✓ 769 WI DNR records · Dodge County

135 ftmedian well depth
118 ft–153 fttypical depth range
24 ftmedian static water level
20 gpmmedian yield (339 tests)

Pull every recorded well near a Columbus (53925) address — $49

How deep are wells in and around Columbus (53925), Wisconsin?

The median drilled well depth in and around Columbus (53925) is 135 ft, based on 348 wells with recorded depths in the state WI DNR database. Half fall between 118 ft and 153 ft; 90% are shallower than 178 ft.

How much does it cost to drill a well in and around Columbus (53925)?

Applying published per-foot rates to the local median depth of 135 ft: drilling and casing alone typically runs $3,375–$8,775; a complete system including pump, pressure tank, and hookup typically runs $8,100–$13,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Columbus (53925)?

The median static water level is 24 ft below ground surface (middle half of wells: 10 ft–35 ft), from 343 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 16 100–150 ft 226 150–200 ft 90 200–300 ft 16 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Columbus (53925)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Columbus (53925)

Free. Goes to licensed drillers working Dodge County.

Part of Dodge County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.