⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Shawano County › Gresham (54128)

Gresham, WI (54128): well depth, water level & drilling cost

✓ 607 WI DNR records · Shawano County

126 ftmedian well depth
64 ft–262 fttypical depth range
24 ftmedian static water level
13 gpmmedian yield (467 tests)

Pull every recorded well near a Gresham (54128) address — $49

How deep are wells in and around Gresham (54128), Wisconsin?

The median drilled well depth in and around Gresham (54128) is 126 ft, based on 468 wells with recorded depths in the state WI DNR database. Half fall between 64 ft and 262 ft; 90% are shallower than 305 ft.

How much does it cost to drill a well in and around Gresham (54128)?

Applying published per-foot rates to the local median depth of 126 ft: drilling and casing alone typically runs $3,150–$8,190; a complete system including pump, pressure tank, and hookup typically runs $7,560–$12,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Gresham (54128)?

The median static water level is 24 ft below ground surface (middle half of wells: 15 ft–34 ft), from 467 measurements.

Drilled depth distribution

0–50 ft 54 50–100 ft 145 100–150 ft 52 150–200 ft 31 200–300 ft 127 300–400 ft 51 400–600 ft 6 600+ ft 2
Looking at a specific property in Gresham (54128)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Gresham (54128)

Free. Goes to licensed drillers working Shawano County.

Part of Shawano County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.