Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Shawano County

Shawano County, Wisconsin: well depth, water level & drilling cost

✓ 9,373 WI DNR records · verified 2026-06-30

121 ftmedian well depth
65 ft–185 fttypical depth range
21 ftmedian static water level
18 gpmmedian yield (6,245 tests)

How deep are wells in Shawano County, Wisconsin?

The median drilled well depth in Shawano County is 121 ft, based on 6,367 wells with recorded depths in the state WI DNR database. Half of all wells fall between 65 ft and 185 ft; 90% are shallower than 275 ft. Wells drilled since 2016 have a median depth of 122 ft.

How much does it cost to drill a well in Shawano County?

Applying published per-foot rates to the local median depth of 122 ft: drilling and casing alone typically runs $3,050–$7,930; a complete system including pump, pressure tank, and hookup typically runs $7,320–$12,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Shawano County?

The median static water level is 21 ft below ground surface (middle half of wells: 14 ft–35 ft), from 6,298 measurements.

How much water do wells in Shawano County produce?

The median tested yield is 18 gpm (middle half: 10 gpm–30 gpm), from 6,245 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Shawano County address — $19

Drilled depth distribution

0–50 ft 758 50–100 ft 1,691 100–150 ft 1,693 150–200 ft 794 200–300 ft 995 300–400 ft 385 400–600 ft 46 600+ ft 5

Who drills wells in Shawano County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
SHAWANO WELL DRILLING INC429
LUISIER WELL DRILLING INC211
DREWS WELL DRILLING INC124
VAN DE YACHT LEO WELL DRILLING INC121
HINTZKE WELL DRILLING INC64
WESLOW WATER SYSTEMS INC51
YOUNG, RAYMOND JR40
RAYMOND YOUNG JR26

Get quotes from local drillers

Looking at a specific property in Shawano County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.