⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Shawano County › Nichols (54152)

Nichols, WI (54152): well depth, water level & drilling cost

✓ 791 WI DNR records · Shawano County

142 ftmedian well depth
102 ft–180 fttypical depth range
18 ftmedian static water level
25 gpmmedian yield (524 tests)

Pull every recorded well near a Nichols (54152) address — $49

How deep are wells in and around Nichols (54152), Wisconsin?

The median drilled well depth in and around Nichols (54152) is 142 ft, based on 534 wells with recorded depths in the state WI DNR database. Half fall between 102 ft and 180 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Nichols (54152)?

Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Nichols (54152)?

The median static water level is 18 ft below ground surface (middle half of wells: 10 ft–31 ft), from 529 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 54 100–150 ft 238 150–200 ft 123 200–300 ft 87 300–400 ft 20 400–600 ft 0 600+ ft 0
Looking at a specific property in Nichols (54152)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Nichols (54152)

Free. Goes to licensed drillers working Shawano County.

Part of Shawano County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.