⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Shawano County › Pulaski (54162)

Pulaski, WI (54162): well depth, water level & drilling cost

✓ 1,148 WI DNR records · Shawano County

142 ftmedian well depth
122 ft–202 fttypical depth range
40 ftmedian static water level
30 gpmmedian yield (642 tests)

Pull every recorded well near a Pulaski (54162) address — $49

How deep are wells in and around Pulaski (54162), Wisconsin?

The median drilled well depth in and around Pulaski (54162) is 142 ft, based on 653 wells with recorded depths in the state WI DNR database. Half fall between 122 ft and 202 ft; 90% are shallower than 242 ft.

How much does it cost to drill a well in and around Pulaski (54162)?

Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pulaski (54162)?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–50 ft), from 651 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 53 100–150 ft 296 150–200 ft 130 200–300 ft 158 300–400 ft 11 400–600 ft 3 600+ ft 1
Looking at a specific property in Pulaski (54162)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pulaski (54162)

Free. Goes to licensed drillers working Shawano County.

Part of Shawano County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.