⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Shawano County › Shawano (54166)

Shawano, WI (54166): well depth, water level & drilling cost

✓ 1,391 WI DNR records · Shawano County

96 ftmedian well depth
59 ft–161 fttypical depth range
20 ftmedian static water level
20 gpmmedian yield (990 tests)

Pull every recorded well near a Shawano (54166) address — $49

How deep are wells in and around Shawano (54166), Wisconsin?

The median drilled well depth in and around Shawano (54166) is 96 ft, based on 1,003 wells with recorded depths in the state WI DNR database. Half fall between 59 ft and 161 ft; 90% are shallower than 285 ft.

How much does it cost to drill a well in and around Shawano (54166)?

Applying published per-foot rates to the local median depth of 96 ft: drilling and casing alone typically runs $2,400–$6,240; a complete system including pump, pressure tank, and hookup typically runs $5,760–$9,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Shawano (54166)?

The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–32 ft), from 998 measurements.

Drilled depth distribution

0–50 ft 154 50–100 ft 356 100–150 ft 207 150–200 ft 107 200–300 ft 90 300–400 ft 86 400–600 ft 3 600+ ft 0
Looking at a specific property in Shawano (54166)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Shawano (54166)

Free. Goes to licensed drillers working Shawano County.

Part of Shawano County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.