⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Door County › Brussels (54204)

Brussels, WI (54204): well depth, water level & drilling cost

✓ 1,478 WI DNR records · Door County

224 ftmedian well depth
140 ft–642 fttypical depth range
40 ftmedian static water level
10 gpmmedian yield (934 tests)

Pull every recorded well near a Brussels (54204) address — $49

How deep are wells in and around Brussels (54204), Wisconsin?

The median drilled well depth in and around Brussels (54204) is 224 ft, based on 1,027 wells with recorded depths in the state WI DNR database. Half fall between 140 ft and 642 ft; 90% are shallower than 685 ft.

How much does it cost to drill a well in and around Brussels (54204)?

Applying published per-foot rates to the local median depth of 224 ft: drilling and casing alone typically runs $5,600–$14,560; a complete system including pump, pressure tank, and hookup typically runs $13,440–$22,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Brussels (54204)?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–70 ft), from 967 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 66 100–150 ft 232 150–200 ft 112 200–300 ft 185 300–400 ft 8 400–600 ft 100 600+ ft 319
Looking at a specific property in Brussels (54204)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Brussels (54204)

Free. Goes to licensed drillers working Door County.

Part of Door County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.