⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Door County

Door County, Wisconsin: well depth, water level & drilling cost

✓ 14,834 WI DNR records · verified 2026-06-30

240 ftmedian well depth
203 ft–262 fttypical depth range
38 ftmedian static water level
15 gpmmedian yield (8,135 tests)

How deep are wells in Door County, Wisconsin?

The median drilled well depth in Door County is 240 ft, based on 8,870 wells with recorded depths in the state WI DNR database. Half of all wells fall between 203 ft and 262 ft; 90% are shallower than 304 ft. Wells drilled since 2016 have a median depth of 242 ft.

How much does it cost to drill a well in Door County?

Applying published per-foot rates to the local median depth of 242 ft: drilling and casing alone typically runs $6,050–$15,730; a complete system including pump, pressure tank, and hookup typically runs $14,520–$24,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Door County?

The median static water level is 38 ft below ground surface (middle half of wells: 15 ft–80 ft), from 8,368 measurements.

How much water do wells in Door County produce?

The median tested yield is 15 gpm (middle half: 10 gpm–25 gpm), from 8,135 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Door County address — $19

Drilled depth distribution

0–50 ft 43 50–100 ft 171 100–150 ft 564 150–200 ft 747 200–300 ft 6,054 300–400 ft 804 400–600 ft 122 600+ ft 365

Who drills wells in Door County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
VAN DE YACHT LEO WELL DRILLING INC640
EUCLIDE, MARK E310
RETZLAFF & GREGORICH233
WESLOW WATER SYSTEMS INC215
MARK E EUCLIDE194
GROUND SOURCE INC137
LUISIER WELL DRILLING INC90
HINTZKE WELL DRILLING INC83

Get quotes from local drillers

Looking at a specific property in Door County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.