Wisconsin Well Data › Door County › Ellison Bay (54210)
Ellison Bay, WI (54210): well depth, water level & drilling cost
✓ 1,178 WI DNR records · Door County
Pull every recorded well near a Ellison Bay (54210) address — $49
How deep are wells in and around Ellison Bay (54210), Wisconsin?
The median drilled well depth in and around Ellison Bay (54210) is 225 ft, based on 642 wells with recorded depths in the state WI DNR database. Half fall between 202 ft and 242 ft; 90% are shallower than 262 ft.
How much does it cost to drill a well in and around Ellison Bay (54210)?
Applying published per-foot rates to the local median depth of 225 ft: drilling and casing alone typically runs $5,625–$14,625; a complete system including pump, pressure tank, and hookup typically runs $13,500–$22,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Ellison Bay (54210)?
The median static water level is 38 ft below ground surface (middle half of wells: 15 ft–65 ft), from 601 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Door County.
Part of Door County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.