⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Door County › Ephraim (54211)

Ephraim, WI (54211): well depth, water level & drilling cost

✓ 663 WI DNR records · Door County

240 ftmedian well depth
221 ft–242 fttypical depth range
60 ftmedian static water level
20 gpmmedian yield (360 tests)

Pull every recorded well near a Ephraim (54211) address — $49

How deep are wells in and around Ephraim (54211), Wisconsin?

The median drilled well depth in and around Ephraim (54211) is 240 ft, based on 371 wells with recorded depths in the state WI DNR database. Half fall between 221 ft and 242 ft; 90% are shallower than 280 ft.

How much does it cost to drill a well in and around Ephraim (54211)?

Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Ephraim (54211)?

The median static water level is 60 ft below ground surface (middle half of wells: 20 ft–105 ft), from 366 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 8 100–150 ft 1 150–200 ft 37 200–300 ft 306 300–400 ft 16 400–600 ft 1 600+ ft 0
Looking at a specific property in Ephraim (54211)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Ephraim (54211)

Free. Goes to licensed drillers working Door County.

Part of Door County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.