⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Door County › Maplewood (54226)

Maplewood, WI (54226): well depth, water level & drilling cost

✓ 822 WI DNR records · Door County

221 ftmedian well depth
164 ft–244 fttypical depth range
25 ftmedian static water level
15 gpmmedian yield (506 tests)

Pull every recorded well near a Maplewood (54226) address — $49

How deep are wells in and around Maplewood (54226), Wisconsin?

The median drilled well depth in and around Maplewood (54226) is 221 ft, based on 548 wells with recorded depths in the state WI DNR database. Half fall between 164 ft and 244 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Maplewood (54226)?

Applying published per-foot rates to the local median depth of 221 ft: drilling and casing alone typically runs $5,525–$14,365; a complete system including pump, pressure tank, and hookup typically runs $13,260–$22,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Maplewood (54226)?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–40 ft), from 521 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 15 100–150 ft 95 150–200 ft 77 200–300 ft 300 300–400 ft 42 400–600 ft 4 600+ ft 11
Looking at a specific property in Maplewood (54226)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Maplewood (54226)

Free. Goes to licensed drillers working Door County.

Part of Door County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.