⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Langlade County › Antigo (54409)

Antigo, WI (54409): well depth, water level & drilling cost

✓ 1,639 WI DNR records · Langlade County

60 ftmedian well depth
41 ft–87 fttypical depth range
22 ftmedian static water level
20 gpmmedian yield (851 tests)

Pull every recorded well near a Antigo (54409) address — $49

How deep are wells in and around Antigo (54409), Wisconsin?

The median drilled well depth in and around Antigo (54409) is 60 ft, based on 981 wells with recorded depths in the state WI DNR database. Half fall between 41 ft and 87 ft; 90% are shallower than 125 ft.

How much does it cost to drill a well in and around Antigo (54409)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Antigo (54409)?

The median static water level is 22 ft below ground surface (middle half of wells: 15 ft–44 ft), from 900 measurements.

Drilled depth distribution

0–50 ft 361 50–100 ft 454 100–150 ft 92 150–200 ft 38 200–300 ft 28 300–400 ft 8 400–600 ft 0 600+ ft 0
Looking at a specific property in Antigo (54409)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Antigo (54409)

Free. Goes to licensed drillers working Langlade County.

Part of Langlade County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.