⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Langlade County

Langlade County, Wisconsin: well depth, water level & drilling cost

✓ 7,507 WI DNR records · verified 2026-06-30

66 ftmedian well depth
46 ft–105 fttypical depth range
26 ftmedian static water level
18 gpmmedian yield (4,376 tests)

How deep are wells in Langlade County, Wisconsin?

The median drilled well depth in Langlade County is 66 ft, based on 4,671 wells with recorded depths in the state WI DNR database. Half of all wells fall between 46 ft and 105 ft; 90% are shallower than 162 ft. Wells drilled since 2016 have a median depth of 64 ft.

How much does it cost to drill a well in Langlade County?

Applying published per-foot rates to the local median depth of 64 ft: drilling and casing alone typically runs $1,600–$4,160; a complete system including pump, pressure tank, and hookup typically runs $3,840–$6,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Langlade County?

The median static water level is 26 ft below ground surface (middle half of wells: 15 ft–44 ft), from 4,519 measurements.

How much water do wells in Langlade County produce?

The median tested yield is 18 gpm (middle half: 15 gpm–20 gpm), from 4,376 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Langlade County address — $19

Drilled depth distribution

0–50 ft 1,343 50–100 ft 2,033 100–150 ft 751 150–200 ft 252 200–300 ft 241 300–400 ft 49 400–600 ft 2 600+ ft 0

Who drills wells in Langlade County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
DREWS WELL DRILLING INC413
RHINELANDER WELL DRILLING INC98
JELINEK WELL DRILLING INC49
T & T WELL DRILLING & PUMP SERVICE39
SHAWANO WELL DRILLING INC37
LUISIER WELL DRILLING INC28
NEHLS & WEBSTER WELL DRILLING24
BRADLEY M HARTMAN21

Get quotes from local drillers

Looking at a specific property in Langlade County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.